Rki-instruments SDM-2012 PC Controlled Configuration Manuel d'utilisateur télécharger pdf (Page 208)

203 • Calibrating GX-2012s and Gas Tracers

If you are calibrating a 0 - 10000 ppm Gas Tracer, the screen will appear as

shown below. The ppm sensor will be calibrated using GAS 2. The GAS 2

selection box is deselected by default. You must select the GAS 2 box to bump

test the ppm combustible sensor. If you do not select the GAS 2 box, the bump

test will not continue. Be sure that the ppm calibration cylinder is connected to

the GAS 2 fitting with a 6 inch humidifier at the start of the calibration.

Figure 162: Gas Order Confirmation Screen, 0 - 10000 ppm Gas Tracer

9. Click OK. You will be asked if you want to calibrate the instrument(s). Click OK

to proceed. If you don’t want to proceed with the calibration, click Cancel to

return to the main program window.

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 217 218

Pas de commentaire

Rki-instruments SDM-2012 PC Controlled Configuration Manuel d'utilisateur Page 208