Rki-instruments GX-2012 Manuel d'utilisateur télécharger pdf (Page 78)

74 • Set Window

5. Click the Set button to display the Set Window. Use the GX-2012

Status Frame and the Gas/Sensor Frame to change parameters stored

in the instrument.

6. To change the serial number stored in the instrument, click the serial

number field and use the backspace key to remove the current entry,

then type the new serial number.

7. To change the station ID or user ID, click on the down arrow in the

desired box and select a new station ID or user ID from the list. The

available station and user IDs are ones that are stored in the

instrument’s memory.

8. To change the datalogging trend interval time, click on the down arrow

in the Interval Trend Time box and select the desired interval time in

seconds. The available choices are 10, 20, 30, 60, 180, 300, and 600

seconds.

9. To change the channel parameters, double-click the field you wish to

change (e.g. H2S AutoCal.) to select it, then type the new information.

10.After you have finished entering new parameters, you must upload this

Figure 74: Set Window

Click to upload changes to instrument

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 89 90

Pas de commentaire

Rki-instruments GX-2012 Manuel d'utilisateur Page 78