Rki-instruments SM-2003U Manuel d'utilisateur télécharger pdf (Page 32)

32 • Charging an Instrument in a Calibration Station

4. If the battery pack is fully charged, then the CHARGE status LED

will turn solid green in a few minutes.

If the battery pack is drained enough for the calibration station to

charge it, the CHARGE status LED will continue to blink yellow

while charging is taking place. Both the GX-2001 and GX-2003 will

take approximately 90 minutes to fully charge.

5. When the charge is complete, the CHARGE status LED will turn

solid green.

To recharge the batteries in an instrument without performing any other

operations:

1. Place the instrument in the calibration station. If no bump test or

calibration will be performed, it is not necessary to make any tubing

connections to the instrument.

2. Turn on the calibration station using the power switch on the back.

3. The CHARGE status LED on the right front of the calibration station

will begin to blink green for a few seconds, then blink yellow.

4. If the battery pack is fully charged, then the blinking yellow LED will

turn solid green in a few minutes.

If the battery pack is drained enough for the module to charge it,

the CHARGE status LED will continue to blink yellow while

charging is taking place. Both the GX-2001 and GX-2003 will take

approximately 90 minutes to fully charge.

5. When the charge is complete, the CHARGE status LED will turn

solid green.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 45 46

Pas de commentaire

Rki-instruments SM-2003U Manuel d'utilisateur Page 32