Rki-instruments 61-0191RK Manuel d'utilisateur télécharger pdf (Page 5)

61-1004RK/61-0191RK Carbon Dioxide Detector • 1

Overview

This manual describes the 61-1004RK CO

(carbon dioxide) detector. This manual also

describes how to install, start up, maintain, and calibrate the detector when used with a

gas monitoring controller. A parts list at the end of this manual lists replacement parts and

accessories for the CO

detector.

The 61-1004RK CO

detector includes the 61-0191RK detector and a junction box. This

manual may also be used for the 61-0191RK CO

detector which does not include a

junction box and is normally mounted in one of a controller’s conduit hubs and factory

wired to the controller. If you are using a 61-0191RK CO

detector, disregard all references

to the junction box and junction box terminal block.

Specifications

Table 1 lists specifications for the CO

detector.

WARNING: When using the 61-1004RK, you must follow the instructions and warnings

in this manual to assure proper and safe operation of the 61-1004RK and to

minimize the risk of personal injury. Be sure to maintain and periodically

calibrate the 61-1004RK as described in this manual.

Table 1: 61-1004RK Specifications

Detection Range With Junction Box

61-1004RK-02: 0 - 5,000 ppm CO

61-1004RK-03: 0 - 5% Volume CO

61-1004RK-05: 0 - 50% Volume CO

61-1004RK-10: 0 - 100% Volume CO

Without Junction Box

61-0191RK-02: 0 - 5,000 ppm CO

61-0191RK-03: 0 - 5% Volume CO

61-0191RK-05: 0 - 50% Volume CO

61-0191RK-10: 0 - 100% Volume CO

Area Classification Explosionproof for Class I, Groups B, C, and D

Sampling Method Diffusion

Response Time 90% in 45 seconds

Accuracy ± 5% of reading or ± 2% of full scale (whichever is greater)

1 2 3 4 5 6 7 8 9 10 ... 16 17

Pas de commentaire

Rki-instruments 61-0191RK Manuel d'utilisateur Page 5